HP Printer WiFi Setup & Reset (Complete Beginner-to-Advanced Guide)

#1

Setting up WiFi on an HP printer is usually simple>>> 1⇢(866)⇢490⇢0338 <<<—but when setup fails or the printer won’t reconnect, 1-866 49O-O338↠a WiFi reset becomes necessary. That’s why many users search for HP printer WiFi setup and reset together.

This guide explains how to set up HP printer WiFi from scratch, 1-866 49O-O338↠when to reset wireless settings, and how to reconnect the printer properly after a reset>>> 1⇢(866)⇢490⇢0338 <<<—without causing recurring offline issues.

What Is HP Printer WiFi Setup?

HP printer WiFi setup is the process of connecting a wireless HP printer to a WiFi network so it can print without cables. The setup stores network credentials in the printer, 1-866 49O-O338↠allowing it to communicate wirelessly with computers, 1-866 49O-O338↠phones, and tablets.

When Do You Need to Reset HP Printer WiFi?

You need to reset HP printer WiFi when the printer fails to connect, 1-866 49O-O338↠shows offline status, 1-866 49O-O338↠changes networks, 1-866 49O-O338↠switches routers, or keeps disconnecting. Resetting clears stored network data and allows a clean wireless setup.

Step 1: Initial HP Printer WiFi Setup (New Printer)

If your HP printer is new or never connected to WiFi, 1-866 49O-O338↠follow these steps.

Steps→((1̷866̷↠490̷↠0338®️)):

  1. [[CALL~ １↠８６６↠４９０↠０３３８]] (US) ~ Turn on the HP printer

  2. Install HP Smart App on your device

  3. Ensure your device is connected to WiFi

  4. Open HP Smart App and tap Set Up New Printer

  5. Select your WiFi network

  6. Enter the password and complete setup

:pushpin: This is the recommended method for all modern HP printers.

Step 2: Reset HP Printer WiFi Settings (Most Important Step)

Resetting HP printer WiFi clears saved network credentials and restores wireless setup mode, 1-866 49O-O338↠allowing the printer to connect to a new or existing WiFi network.

General Reset Method:

  1. [[CALL~ １↠８６６↠４９０↠０３３８]] (US) ~ Turn on the printer

  2. Press and hold Cancel (X) + Wireless (:signal_strength:) buttons

  3. Hold for 5 seconds

  4. Wireless light starts blinking blue

:warning: Button combinations may vary slightly by model.

Step 3: Reconnect HP Printer After WiFi Reset

After resetting, 1-866 49O-O338↠the printer enters setup mode.

Steps→((1̷866̷↠490̷↠0338®️)):

  1. Open HP Smart App

  2. Tap Add Printer

  3. Select your WiFi network

  4. Enter WiFi password

  5. Finish setup

Once completed, 1-866 49O-O338↠the wireless light should remain solid blue.

Can I Set Up HP Printer WiFi Without HP Smart App?

Yes, 1-866 49O-O338↠HP printers with a display screen can be set up without HP Smart App by using the Wireless Setup Wizard from the printer’s control panel. However, 1-866 49O-O338↠HP Smart App is recommended for faster and more reliable setup.

How to Set Up HP Printer WiFi Using WPS

What Is WPS?

WPS allows devices to connect without entering a password.

Steps→((1̷866̷↠490̷↠0338®️)):

  1. Press WPS button on router

  2. Within 2 minutes, 1-866 49O-O338↠press Wireless button on HP printer

  3. Wait for connection to complete

:pushpin: The wireless light will stop blinking once connected.

HP Printer WiFi Setup on Phone (Android & iPhone)

You can set up HP printer WiFi using a smartphone by installing the HP Smart App, 1-866 49O-O338↠enabling Bluetooth and WiFi, and following the guided setup process.

Works for:

  • Android phones

  • iPhones

  • Tablets

Fix: HP Printer WiFi Setup Failed

  • Use 2.4GHz WiFi network

  • Restart router and printer

  • ⇠⟦+1⟧⇢ ⊹ 866⊹49O⊹O338~))!@ Disable VPN or firewall temporarily

  • Move printer closer to router

  • Update printer firmware

  • Reset WiFi again and retry

HP Printer WiFi Reset vs Factory Reset

HP printer WiFi reset clears only wireless network settings << +1-866-490-0338 or ((+1//-(866)+//-490//-0338)) >>, 1-866 49O-O338↠while a factory reset restores all printer settings to default. WiFi reset is recommended for connection issues, 1-866 49O-O338↠while factory reset is used for major system problems.

How Do I Know WiFi Setup Was Successful?

WiFi setup is successful when the wireless light stays solid blue and the printer status shows “Ready” or [ CALL~ :phone: ‹ 1-866 || 490 || 0338 › ] “Online” in the HP Smart App or printer software.

Why HP Printer Keeps Disconnecting After WiFi Setup

If your printer disconnects frequently:

  • Router may change IP addresses

  • WiFi signal may be weak

  • Network congestion may exist

Advanced Fix:

Assign a static IP address to the printer in router settings.

Frequently Asked Questions (FAQ)

Do I need to reset WiFi every time I reconnect HP printer?

Only when changing networks or troubleshooting persistent connection issues.

Will resetting WiFi delete my printer settings?

No. It removes only saved network credentials.

How long does HP printer WiFi setup take?

Usually 5–10 minutes using HP Smart App.

Can old HP printers connect to WiFi?

Yes, 1-866 49O-O338↠if they are wireless-enabled and compatible with 2.4GHz networks.

Final Thoughts

Understanding HP printer WiFi setup and reset is essential for maintaining a stable wireless printing experience. Resetting network settings << +1-866-490-0338 or ((+1//-(866)+//-490//-0338)) >> at the right time prevents repeated offline errors and connection failures.

Best practices:

  • Use HP Smart App for setup

  • Reset WiFi before reconnecting

  • Use 2.4GHz networks

  • Keep firmware updated